3 SECTION MAST 10.5M
A fairly compact, yet heavier mast.
- Developed for light to medium UHF, VHF or HF antennae, where a low retracted height is needed eg behind a bungalow
- Recently upgraded, now offering the additional benefit of a 4-pulley tilt system to make it easier to tilt
|Outer mast and ground post||90 x 90mm RHS|
|1st stage inner mast||70 x 70mm RHS|
|2nd stage inner mast||60.3mm CHS|
|Ground socket||1mm sheet folded|
CONSTRUCTION AND FINISH
Welded using MIG process
Galvanised to ISO 1461
|Ground post length||2.4m 1.45m above ground|
|Mast tilted over||1.4m (4’6″)|
|Mast vertical lowered||4.3m (14′)|
|Mast vertical raised||10.5m (35’5″)|
HEAD LOAD CAPACITY
eg: 2 element compact tribander, 2m co-linear and 2m beam. Guying recommended when raised in windy conditions.
For safety, the DL1200 Friction braked winch can be supplied as an option, at additional cost.
- In one cubic metre of concrete, supplied by the user.
- Ground socket is installed in the concrete, allowing easy post removal.
If the optional rotator cage is supplied, the stub mast should not exceed 2m, ie, 1.5m above top of cage.
The mast is delivered in two packages, complete and ready to install.
Shipping weight 140kg.
Enquiry saved for the product: 3 SECTION MAST 10.5M