|
Product Specification
MATERIAL
| Mast and ground post |
70 x 70 x 3 mm RHS |
| Upper mast |
60 x 45 x 3 mm RHS |
CONSTRUCTION AND FINISH
Welded using MIG process.
Galvanised to ISO 1461.
SPECIFICATIONS
| Outer mast length |
3.8m |
12'6" |
| Inner mast length |
4.2m |
14' |
| Mast vertical lowered |
4.2m |
14' |
| Mast vertical raised |
7.6m |
25' |
HEAD LOAD CAPACITY
| Nominal |
18kg |
| Maximum |
25kg |
e.g.: 2 element compact tribander and 2m co-linear.
Guying recommended when raised in windy conditions.
WINCH
DL600
MOUNTING
Installation is by four off 10mm Rawl Bolts (not supplied).
Supplied brackets are nominal 300mm or 450mm stand off from the wall.
A tilt kit is available as an additional option.
A socket can be supplied as an option to the wall brackets, so that the
mast can be ground mounted. Please note this is not suitable for tilting.
STUB MAST
Any Alloy pole up to 50mm can be accommodated, and should be restricted
to a maximum length of 2.1m i.e., 1.6m above the rotator.
When delivered, the mast is complete and ready to install. It is delivered
in two packages.
Shipping weight is 50kg. | 
