Tennamast.com
Online purchasing is currently
unavailable.
Tennamast.com
Tennamast.com Contact Us

Tennamast Masts for Amateur Radio

The Tennamast range of permanent and mobile masts continue to set new standards in commercial, defence and domestic situations.

So flexible is the Tennamast range of masts that the same product will suit virtually any application from CCTV surveillance to flood lighting, defence communications to amateur radio. We can even design bespoke solutions to individual specifications with little premium on price and because the same masts are available in both static and mobile models, there is no limit to where they can be used.

Precision engineering and the use of only the finest materials also ensure maximum reliability and durability. The Tennamast range can withstand the severest climatic conditions without problems, capable of withstanding a windspeed up to 150kph. They meet the requirements of BS EN ISO 6399 1997.

The basic masts, all manufactured to our own high levels of quality in our workshops come fully galvanised to ISO 1461. Quality is guaranteed and controlled by our own in house quality system.

The masts are not only unmatched in durability. Their simple, safe design means reliable performance time after time. Nylon pulleys and nylon top sleeves where appropriate cut down friction giving easy operation and reduced wear. The pulley and winch arangement combine to allow the mast to be easily raised by one person.

Because most of our masts are tilt over, any maintenance can be carried out at ground level ensuring maximum operator safety.

Our range of masts is continually being expanded to accomodate both commercial and domestic needs. If you require a bespoke mast solution not covered by our existing range please contact us.

Adapt-A-Mast

The Adapt-A-Mast is suitable for lightweight antenna applications and are ideal when there is little or no garden space available in which to mount a free standing mast.

They are also preferred by many users and councils, in that they present a very low visual presence. They are both easy and cheap to install. In some areas they do not attract the need for planning permission as they are simply fixed to the wall of the house or outhouse / garage etc.

Adapt-A-Mast 7.6m
Adapt-A-Mast 10m

Adapt-A-Mast

Lightweight Mast

The 7.6m Lightweight mast is the correct choice when a free standing mast is required and the antenna load will fall within the suggested limits. As there is only a 2 pulley tiltover system of mast operation, an excess load can be applied to the cable if the head load is too great.
This mast is intended for installation in the grounds of a bungalow or similar where overall height is either a constraint or not needed.
It is fine for lightweight VHF and / or HF antennas.

The 9.2m mast is built similarly to the 7.6m model but due to it having a 4 pulley system of operation, it is capable of lifting a slightly heavier load of antennas. With it being 1.6m taller it gives more scope for VHF operation and extra elevation of the antennas.

Lightweight Mast 7.6m
Lightweight Mast 9.2m

7.6m Lightweight Mast

Standard Mast 10.7m or 12m

This mast is free standing and was the first type of mast we made, it is the mast from which all our other masts are derived. It is a substantial mast built to exacting standards. Like all our other masts, it is built from the most suitable materials and has evolved into the preferred antenna support system of our range.
It is capable of supporting a wide range of antennas and can be simultaneously used for UHF, VHF and HF antennas of medium size.
The 12m version of this mast benefits from both greater height and a heavier ground post. It benefits from the larger optional winch in order to accommodate the extra cable length

Standard Mast 10.7m
Standard Mast 12m

Standard Mast

10.5m 3 Section Mast

This mast has been developed for light to medium UHF, VHF or HF antennas, and where a low retracted height is needed e.g. behind a bungalow. It has benefited from a recent upgrade; a 4-pulley tilt system has been introduced to make it easier to tilt. While this is a fairly compact mast it is one of our heavier ones.

More information

3 Section Mast

Mobile Mast

Our mobile masts are again made from the best and most appropriate materials and like our other products are fully hot dip galvanised for protection. They are the obvious choice for any application from supporting antennas to overhead photography. While they are not tall, most of them can be extended by simple means to achieve the customer’s needs. They are readily transportable and can be easily towed by a family car or small van.

More information

Mobile Mast

TennaTourer

A drive-on portable mast mounting.

More information

TennaTourer

Rotator Cage

The rotator cage is supplied as standard with some of our masts. It eliminates any side loads on an installed rotator. Due to the design they also void the need for a top bearing. The cages are made in 3 different sizes and are intended to fit 48.1, 60.3 or 76.1mm diameter mounting poles. The top sleeve, which is built in, has an inside diameter of 52mm / 2inches They will accept a standard alloy scaffold pole as an extension but will not accept a 2inch lightweight pole.

More information

Rotator Cage

Mast Accessories

Tennamast can supply a complete range of accessories for our products. These include control rope, replacement pulleys, all parts, a full range of Dutton-Lainson winches – standard and friction braked - also many and various marine products which are not stocked but are available on short lead times.

More information

Mast Accessories
The Yacht Harbour Association
British Marine Federation
Silk Cut Nautical Awards
Tennamast (Scotland) Ltd, 81 Mains Road, Beith, KA15 2HT, Tel. +44 (0) 1505 503824, Fax. +44 (0) 1505 503246, Email. sales@tennamast.com
© Copyright 2009 Tennamast (Scotland) Ltd. All Rights Reserved.
Registered Company in Scotland SC361351