Under Cover Cradle

Gallery

The main frame is fabricated from 127x64mm -channel section, and can be left as manufactured or galvanized. The simple design allows many cradles to be stacked for summer storage and is easy to transport in numbers.

The cradle is 3.5m long and up to 2.4m wide at the rear. The front measures 1.5m. This configuration allows it to be used in conjunction with most boat movers. It is not intended for lifting a boat.

The narrow width of the front of the cradle allows the "U" frame types of boat mover easy access and does not impede the easy positioning of the craft.

Legs, which incline and extend from 1060mm - 1980mm, allow the correct positioning of the 4 carpeted hull pads. The legs are supplied as "Standard" or "Short" depending on the draft of the craft to be supported.

Provision has been designed into the legs to allow chain restraints to be fitted between the front and rear pair of legs if required by the owner

Cradles

Tennamast (Scotland) Ltd

81 Mains Road
Beith
Ayrshire
Scotland
KA15 2HT

Tel +44(0)1505 503824
Fax +44(0)1505 503246