Adapt-A-Mast 7.6m

Gallery

The Adapt-A-Mast is suitable for lightweight antenna applications and are ideal when there is little or no garden space available in which to mount a free standing mast.

They are also preferred by many users and councils, in that they present a very low visual presence. They are both easy and cheap to install. In some areas they do not attract the need for planning permission as they are simply fixed to the wall of the house or outhouse / garage etc.

MATERIAL

Mast and ground post	70 x 70 x 3 mm RHS
Upper mast	60 x 45 x 3 mm RH

CONSTRUCTION AND FINISH

Welded using MIG process.
Galvanised to ISO 1461.

SPECIFICATIONS

Outer mast length	3.8m	12'6"
Inner mast length	4.2m	14'
Mast vertical lowered	4.2m	14'
Mast vertical raised	7.6m	25'

HEAD LOAD CAPACITY

Nominal	18kg
Maximum	25kg

e.g.: 2 element compact tribander and 2m co-linear. Guying recommended when raised in windy conditions.

WINCH

DL600

MOUNTING

Installation is by four off 10mm Rawl Bolts (not supplied).
Supplied brackets are nominal 300mm or 450mm stand off from the wall.
A tilt kit is available as an additional option.
A socket can be supplied as an option to the wall brackets, so that the mast can be ground mounted. Please note this is not suitable for tilting.

STUB MAST

Any Alloy pole up to 50mm can be accommodated, and should be restricted to a maximum length of 2.1m i.e., 1.6m above the rotator.
When delivered, the mast is complete and ready to install. It is delivered in two packages.

Shipping weight is 50kg.

Amateur Radio Masts

Tennamast (Scotland) Ltd

81 Mains Road
Beith
Ayrshire
Scotland
KA15 2HT

Tel +44(0)1505 503824
Fax +44(0)1505 503246