8m/10m Utility Tilt Over Mast

We can make this type of mast to meet customer needs. The one illustrated is being used both as a navigation light and floodlights. Many of this type have been adapted for purposes ranging from lightweight floodlighting and communications to major installations of floodlighting of commercial yards, PA systems and a wide range of additional applications.

Tennamast can custom build all of our range to meet customer requirements.

Material

Ground post: 90 x 90 x 5 RHS.
Mast: 90 x 90 x 5 RHS. Reducing to 60.3mm CHS.

Construction and Finish

Welded using MIG. Process.
Hot Dip Galvanised to ISO 1461.

Quality

Controlled by our "in house" quality procedures.

Head load Capacity

2 off lights or antennas with an area of not exceeding 1200 x 200mm gives a survival of 1.46:1 at a W/S of 160 Kph. Conforms to BS 6399.

Winch

Removable DL 800 lbs. Friction braked winch complete with cable.
The mast is fitted with a 4-pulley tilt system for ease of operation by one person.

Mounting

Base plate 600 x 600mm - secured to foundation by 4 0ff 22mm dia. anchor bolts. Embedded in 1 x 1 x 1m deep 20Nm concrete, or socket
to accept the post.

Extras

An equipment box can be supplied at additional cost if required.
A suitable mounting for either lights or antennas can be constructed to meet customer needs at additional cost.
All cabling is accessible through the base. The cables transfer between the post and mast, below the hinge position.

Utility Mast

Tennamast (Scotland) Ltd

81 Mains Road
Beith
Ayrshire
Scotland
KA15 2HT

Tel +44(0)1505 503824
Fax +44(0)1505 503246