MATERIAL
Mast and ground post....70 x 70 x 3 mm RHS
Upper mast..............60 x 45 x 3 mm RHS

CONSTRUCTION AND FINISH
Welded using MIG process. Galvanised to BS729.

SPECIFICATIONS
Outer main mast..........3.8m.....(12'6")
Inner mast...............4.2m.....(14')
Mast vertical lowered....4.2m.....(14')
Mast vertical raised.....7.6m.....(25')

HEAD LOAD CAPACITY
Nominal..................18kg
Maximum..................25kg
e.g.: 2 element compact tribander and 2m co-linear.
Guying recommended when raised in windy conditions.

WINCH
DL600

MOUNTING
Installation is by four off 10mm Rawl Bolts (not supplied).
Supplied brackets are nominal 300mm or 450mm stand off from the wall.
A tilt kit is available as an additional option.
A socket can be supplied as an option to the wall brackets, so that the mast can be ground mounted. Please note this is not suitable for tilting.

STUB MAST
Any Alloy pole up to 50mm can be accommodated, and should be restricted to a maximum length of 2.1m i.e., 1.6m above the rotator.
When delivered, the mast is complete and ready to install. It is delivered in two packages.
Shipping weight is 50kg.

MATERIAL
Outer Mast....70 x 70 x 3 mm RHS
Inner Mast....60 x 45 x 3 mm RHS

CONSTRUCTION AND FINISH
Welded using MIG process.
Galvanised to BS729.

SPECIFICATIONS
Outer Mast Length......... 5.3m.....(17'6")
Inner Mast Length......... 6m.......(20')
Mast vertical lowered..... 6m.......(20')
Mast vertical raised.......10m.....(33'6")

HEAD LOAD CAPACITY
Nominal..................10kg
Maximum..................18kg
e.g.: 2 element compact tribander and 2m co-linear.
Guying recommended in windy conditions.

WINCH
DL600

MOUNTING

Installation is by four off 10mm Rawl Bolts (not supplied).
Supplied brackets are nominal 300mm or 450mm stand off from the wall.
A tilt kit is available as an additional option.
A socket can be supplied as an option to the wall brackets, so that the mast can be ground mounted. Please note this is not suitable for tilting.

STUB MAST
Any Alloy pole up to 50mm can be accommodated, and should be restricted to a maximum length of 1.8m i.e., 1.2m above the rotator.
When delivered, the mast is complete and ready to install. It is delivered in two packages.
Shipping weight is 70kg.

MATERIAL
Outer Mast and ground post....70 x 70 x 3.6 mm RHS
Inner Mast..............60.3 OD CHS
Ground socket...........1mm sheet folded
Rotator housing.........Not supplied as standard

CONSTRUCTION AND FINISH
Welded using MIG process. Galvanised to BS729.

SPECIFICATIONS
Ground post length..............1.9m(1.4m above ground)
Outer mast length.............. 3.8m
Inner mast length...............4.4m
Mast tilted over................1.4m
Mast vertical lowered...........3.8m
Mast vertical raised............7.6m

HEAD LOAD CAPACITY
Nominal..................18kg
Maximum..................25kg
e.g.: A compact H.F. tribander and 2m co-linear.

WINCH
DL600

MOUNTING
In one metre square by half metre deep concrete, supplied by the user.
The ground socket is installed in the concrete, allowing easy ground post removal

STUB MAST
If the optional Rotator cage is supplied, the stub mast should not exceed 2m i.e., 1.5m above top of the cage.

MATERIAL
Outer Mast and ground post....70 x 70 x 3.6 mm RHS
Inner mast..............60.3 OD CHS
Ground socket...........1mm sheet folded
Rotator housing.........Not supplied as standard

CONSTRUCTION AND FINISH
Welded using MIG process.
Galvanised to BS729.

SPECIFICATIONS
Ground post length...........1.9m.....(1.4m above ground)
Outer mast length........... 4.6m
Inner mast length........... 5.2m
Mast tilted over.............1.4m
Mast vertical lowered........5.2m
Mast vertical raised.........9.2m

HEAD LOAD CAPACITY
Nominal..................18kg
Maximum..................22kg
e.g.: A compact H.F. tribander and 2m co-linear.

WINCH
DL600

MOUNTING
In concrete one metre square by half metre deep supplied by the user.
The ground socket is installed in the concrete, allowing easy ground post removal

STUB MAST
If the optional Rotator cage is supplied, the aluminium scaffold pole must not exceed 2m i.e., 1.5m above top of rotator housing.
When delivered, the mast is complete and ready to install. It is delivered in two packages.
Shipping weight is 90kg.

MATERIAL
Outer Mast and ground post....90 x 90 x 3.6 mm RHS
1st stage inner mast..........70 x 70 x 3.6mm RHS
2nd stage inner mast..........60.3mm CHS
Ground socket.................1mm sheet folded

CONSTRUCTION AND FINISH
Welded using MIG process.
Galvanised to BS729.

SPECIFICATIONS
Ground post length..............2.4m.....(1.45m above ground)
Mast tilted over................1.4m
Mast vertical lowered...........4.3m
Mast vertical raised............10.5m

HEAD LOAD CAPACITY
Nominal..................20kg
Maximum..................30kg
e.g.: A 2 element compact tribander and 2m co-linear. and 2m beam
Guying recommended when raised in windy conditions

WINCH
DL1100

MOUNTING
In one cubic metre of concrete supplied by the user.
The ground socket is installed in the concrete, allowing easy post removal

STUB MAST
If the optional rotator cage is supplied, the stub mast should not exceed 2m i.e., 1.5m above top of cage.
When delivered, the mast is complete and ready to install. It is delivered in two packages.
Shipping weight is 140kg

MATERIAL
Outer Mast and ground post....90 x 90 x 3.6 mm RHS
Inner mast....................76.1 OD CHS
Ground socket.................1mm sheet folded
Rotator housing...............Fabricated plate and tube welded construction

CONSTRUCTION AND FINISH
Welded using MIG process.
Galvanised to BS729.

SPECIFICATIONS
Ground post length..............2.4m.....(1.45m above ground)
Outer mast length...............5.2m
Inner mast length.............. 6.4m
Mast tilted over................1.4m
Mast vertical lowered...........6.4m
Mast vertical raised............10.7m

HEAD LOAD CAPACITY
Nominal..................25kg
Maximum..................50kg
e.g.: A full sized H.F. tribander and 2m co-linear. and 2m beam
Guying recommended when raised in windy conditions

WINCH
DL1100

MOUNTING
In one cubic metre of concrete supplied by the user.
The ground socket is installed in the concrete, allowing easy post removal

STUB MAST
Any Alloy pole up to 48.1mm OD can be accommodated, and should be restricted to a maximum length of 2.5m i.e. 1.8m above the rotator cage.
When delivered, the mast is complete and ready to install. It is delivered in three packages.
Shipping weight is 135kg.

MATERIAL
Ground post............90 x 90 x 5mm RHS
Outer Mast.............90 x 90 x 3.6mm RHS
Inner mast.............76.1 OD CHS
Ground socket..........1mm sheet folded
Rotator housing........Fabricated plate and tube welded construction

CONSTRUCTION AND FINISH
Welded using MIG process.
Galvanised to BS729.

SPECIFICATIONS
Ground post length..............2.5m.....(1.6m above ground)
Outer mast length...............6.55m
Inner mast length...............6.4m
Mast tilted over................1.6m
Mast vertical lowered...........6.9m
Mast vertical raised............12m

HEAD LOAD CAPACITY
Nominal..................20kg
Maximum..................30kg
e.g.: A full sized H.F. tribander and 2m co-linear.

WINCH
DL1100

MOUNTING
In one cubic metre of concrete supplied by the user.
The ground socket is installed in the concrete, allowing easy post removal

STUB MAST
Any Alloy pole up to 48.1mm OD can be accommodated, and should be restricted to a maximum length of 2.0m i.e. 1.5m above the rotator cage.
When delivered, the mast is complete and ready to install. It is delivered in three packages.
Shipping weight is 150kg.,